1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Water In Turn Signal Housing

Discussion in 'Early CJ5 and CJ6 Tech' started by BadGoat, Mar 16, 2020.

  1. BadGoat

    BadGoat How High Can You Climb?

    What do you guys do to keep water from collecting inside the front turn signal housings? Mine are about 1/4 full at the moment. I think I'll drain it into a bottle and sell it as blinker fluid.


    Mike
     
    Jrobz23 likes this.
  2. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Shouldn't be getting water in there if you have the proper gasket to seal it. Can use a proper sized "O" ring if missing gasket.
     
    Rick Whitson likes this.
  3. BadGoat

    BadGoat How High Can You Climb?

  4. Oldriginal86

    Oldriginal86 Member

  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    I would make a rubber gasket for the top half and file a little notch in the bottom as a drain.
     
    BadGoat likes this.
  6. tcfeet

    tcfeet Member

    I'll take a small bottle of that signal lite fluid..:bananatool:
     
    Twin2 likes this.
  7. Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I bought 1/8" Cork gasket material and cut new gaskets for mine with an Xacto knife. Good Luck