1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New Heater For Old Jeep.

Discussion in 'Builds and Fabricators Forum' started by y2k-fxst, Feb 24, 2020.

  1. y2k-fxst

    y2k-fxst Member

    Know this has been talked about a bunch of times. I did a search and read a lot. But, still didn't find a good thread where someone had replaced the under hood warmer with a firewall heater. What I'm truly interested in is one where I can get both floor heat and defroster heat. Will need to be mounted on the passenger side due to swinging pedals. That and I'm not sure how much room I'll really have behind the glove box until my dash arrives from Double D Fab.
     
  2. durk

    durk Member

    image.jpeg image.jpeg image.jpeg Yj heater fits.. Floor surgery/ firewall clearance issues too. Factory glove box will be tight.. Looks top of heater core to back of dash roughly 3 inch.
     
  3. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    the boys 70 has a yj heater in it I trimmed the bottom of the cowl seam some and notched the heater box a little the glove box fits.
     
  4. durk

    durk Member


    • Lol that exactly what I did too. The later jeep yj heating system really can pump out some good heat. Thats why I went this route. Only down side one has to modify the early cj 5 body to get that heater to work.
     
    sterlclan likes this.