Manual Windshield Washer Pump Assy

For those of you like myself that had not seen a complete NOS kit. Here you go. My 1971 has the bag holder (minus the long gone bag) on the driver inner fender, double squirt nozzle with the short hose hanging off it and the push pull assembly minus the pump. Because I had the knob but no pump (long since broken off), I had no idea what this contraption was supposed to look like.

Thanks to all of the input from guys on this forum, I was able to source a NOS pump assembly in addition to a NOS complete kit!

Below are the pics of the NOS kit I just received! The bag and all of the rubber pieces and hoses are still very pliable, like they were just produced!

Thank you everyone who helped me identify and ultimately locate these very hard to find items.
I apologize for the rotated pic. For some reason it is rotating when uploading here.

 

Very cool that you were able to find this complete NOS system! Like winning a small Lottery

 

Unfortunately no, he said that he must have misplaced it over the years. Thankfully my 71 already has the dual nozzle still in the cowl

 

Gotta post a video when all installed and operational.

 

Note of a little caution, if you have headers, because of the heat they give off, that plastic bag will not last long. Learned the hard way.
Mike

 

No headers, stock front dump manifold. But yes you're definitely right about the heat from headers destroying the bag and fast

 

Well, after I install it... It will no longer be NOS, but, the jeep will be complete It doesn't do anyone any good sitting in a box on a shelf .

Thankfully it will not be going into a pos. it is going to be in a frame off restoration and will be living it's true self

 

Very cool - they actually work pretty good.

 

Glad to see you find a unicorn for a proper restoration.
-Donny

 

Is there two holes coming out of the back of the pump? Is there a part number on any of the stuff? I am very sorry if you took a picture of this, but for some reason when I click to enlarge the picture it gives me an error and all I can see are the thumbnails. Thank you in advance!

 

There are two coming out the back. One side pulls from the bag and the other pushes out to the nozzles. I don't remember seeing a part number, however this was a universal part used by more than one car maker.
This is what you want to be using as your search words on the net. TRICO WINDSHIELD WASHER DASH HAND PUMP NOS

 

Perfect! Thank you so much

 

Do you have the location info for mounting the nozzle on the cowl? I have all the parts to install the washer system but do not know how far from base of windshield (or front edge of cowl) to drill the hole. Only want to drill once!

 

If nobody else responds first, I can find time to measure my '71 tomorrow evening.

 

Exactly 14.25" in the middle of cowl between the two inner hood hinge bolts. 2 13/16" back from front of cowl to middle of hole. Hole is 5/16". Will post pics tomorrow.

 

Thanks. That is a great help