1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake Lights Pressure Switch

Discussion in 'Builds and Fabricators Forum' started by FinoCJ, Jan 18, 2020.

Page 2 of 2
  1. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    Fwiw that switch from Amazon is a gm pick up switch think mid eighties. Cheaper at the flaps
     
    sterlclan, Feb 11, 2020
    #21
  2. colojeepguy

    colojeepguy Colorado Springs

    James if you're going with the pressure switch why not just use the tee fitting from a CJ with the dual master cylinder? Idk if anyone makes reproduction of those but if not I'm sure one of the members here has one.
     
    colojeepguy, Feb 15, 2020
    #22
  3. Meeker

    Meeker New Member

    I want to change to a under floor pressure switch as the conversations above are referring to.

    Can anyone share how they installed a under floor brake switch to bypass the original low pressure switch?

    Thanks!
     
    Meeker, Apr 14, 2020
    #23
Page 2 of 2