1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Saginaw Ps Brace Questions.

Discussion in 'Early CJ5 and CJ6 Tech' started by justin_bongo, Oct 4, 2019.

  1. justin_bongo

    justin_bongo Member

    Gents,
    When adding a M.O.R.E. ps clamp to gear box, am I understanding right that it should be as low as possible?
    The bearing is in the bottom of the casting, correct?
    The box I used was the same as Mcruff used.
    78 Catalina, if memory serves right.
    My particular box has webbing and I want to make sure I dont need to grind webbing away.
    Thanks,
    Justin
     
    justin_bongo, Oct 4, 2019
    #1
  2. OzFin

    OzFin Vintage Jeep Guy

    I did not cut the web on mine, I installed the brace attached towards the bottom of the gear.
    [​IMG]
     
    OzFin, Oct 4, 2019
    #2