1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Any Ideal What Rear End This Is?

Discussion in 'Builds and Fabricators Forum' started by 60cjer, Feb 21, 2019.

  1. 60cjer

    60cjer New Member

  2. Framer Mike P

    Framer Mike P Member

    AMC model 20. Out of a cj7 with the quadra trac transfer case. I have been wrong before...
     
    47v6, ITLKSEZ and 73 cj5 like this.
  3. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Looks to have 1 piece axles....
     
  4. 73 cj5

    73 cj5 Not ready for the junkyard yet

    Boat anchor :D:ninja:
     
  5. 60cjer

    60cjer New Member

    i guess these axle charts don't cover all possibilities
     
  6. RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    This is correct.
     
  7. Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    With the one piece axles it's not entirely an anchor. Close. Decent ring and pinion , tubes known to be a little thin. If someone else put the money into it and you got it cheap I wouldn't hesitate to use it if your not going to beat on it.
     
    ITLKSEZ likes this.
  8. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    If it works and works for you, run it and who cares if everyone thinks its junk. My jeep is made primarily of junk.
     
    ITLKSEZ and Fly Navy like this.
  9. garage gnome

    garage gnome ECJ5 welder

    AMC 20s have a bigger ring gear making them stronger than a Dana 44. With one piece shafts, they a very good axle.
     
    RATTYFLATTY likes this.
  10. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    its this. i have one in my back yard, if you would liek it for comparison sake.
     
  11. ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    This.
    With an over-the-top style truss and one-piece shafts, they are near-bombproof.

    Not a 20, obviously, but trussed like this...
    Keeps the tubes in line.
    [​IMG]
     
  12. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    new varg axle?
     
  13. ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Haha
    Not mine.