1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fein Slugger Cold Cut Metal Saw

Discussion in 'The Tool Shed' started by fyrmn, Oct 6, 2018.

  1. fyrmn

    fyrmn Member 2023 Sponsor 2022 Sponsor

    Finally pulled the trigger on a Fein 14" slugger cold cut metal saw.
    What a great improvement over the old hot saw. Cut straight out of the box, minimal if any burr. I have only cut mild steel so far and wish I would have purchased this along time ago. It was expensive (too me) but after looking at reviews and research this was my pick, very pleased.
     
    fyrmn, Oct 6, 2018
    #1
  2. nickmil

    nickmil In mothballs.

    Fein makes pretty good stuff. At least all I've used.
     
    nickmil, Oct 7, 2018
    #2