1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Koenig Bed Extension Parts

Discussion in 'Early CJ5 and CJ6 Tech' started by 1957Willys, Dec 13, 2017.

  1. 1957Willys

    1957Willys Member

    Does anyone have the dimensions for the support braces that go to the draw bar for a Koenig bed extension?
     
    1957Willys, Dec 13, 2017
    #1
  2. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I had a bed extension and was going to use conduit from under the bed extension to the draw bar. I was going to hammer the ends flat and attach to the existing holes in the bed and draw bar. It would be cut to fit.

    I sold the extension with a bunch of parts the second time I said, "No more JEEPS!"
     
    ojgrsoi, Dec 13, 2017
    #2
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    You could use the Pythagorean theorem to get the length.

    A^2 + B^2 = C^2
     
    timgr, Dec 13, 2017
    #3