1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Help Id'ing This PTO

Discussion in 'Early CJ5 and CJ6 Tech' started by GeoffreyL, Oct 30, 2017.

  1. GeoffreyL

    GeoffreyL Well-Known Member

    GeoffreyL, Oct 30, 2017
    #1
  2. mayday

    mayday Sponsor

    mayday, Oct 30, 2017
    #2
    GeoffreyL likes this.
  3. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Koenig does use "WO" parts numbers… And I show a "J50-202 rear housing" in one of my catalogs. Maybe yours is a variant.

    CJ versus truck/wagon differ in clocking…one is angled lower, one is angled higher, as determined by the mounting holes to the transfer.
     
    Last edited: Oct 30, 2017
    PeteL, Oct 30, 2017
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    The CJ ones drop lower, the notch in this indicates it comes up close to the frame for a truck.
     
    Howard Eisenhauer, Oct 30, 2017
    #4
  5. Glenn

    Glenn Kinda grumpy old man Staff Member

    Shows 201 on front side and 202 on back side? Is that correct?
     
    Glenn, Oct 30, 2017
    #5
  6. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Thanks. I couldn't recall, although I've installed both.
     
    PeteL, Oct 30, 2017
    #6