1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Picture Request- King-seeley Instrument Regulator

Discussion in 'Early Jeep Restoration and Research' started by Howard Eisenhauer, Mar 31, 2017.

  1. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Anyone got a pic of one of these things, hopefully showing where it mounts & what style connectors they use?

    I'm trying to figure out if a late 50's - 70's Ford one will work & which one would be the best match.

    Thanks,

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #1
  2. SIDSCJ

    SIDSCJ Jeep addict

    Is this on the back of a six volt speedo cluster?
     
    SIDSCJ, Mar 31, 2017
    #2
  3. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Yes.
     
    Howard Eisenhauer, Mar 31, 2017
    #3
  4. SIDSCJ

    SIDSCJ Jeep addict


    I'll get a better pic
     
    SIDSCJ, Mar 31, 2017
    #4
  5. Framer Mike P

    Framer Mike P Member

    On mine the mounting tab on the regulator mounts under the screw at the 3 o'clock position in the above picture. I think the tab is hidden by the regulator above. I think there is an original regulator on ebay...
     
    Framer Mike P, Mar 31, 2017
    #5
  6. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    There is but it's a crummy picture, it's pricey & the Ford units are designed to handle 12 volts.

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #6
  7. SIDSCJ

    SIDSCJ Jeep addict

    Tab is on the reg, can't see it in the pic. Reg screw eyelet terminals, one on the right is single wire to the fuel gauge , other is a double wire that goes to? They are cut off on mine. Buy mine, comes with speedo attached:lol:
     
    SIDSCJ, Mar 31, 2017
    #7
  8. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Already got all I can use :)

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #8
  9. SIDSCJ

    SIDSCJ Jeep addict

    VR pics
     
    SIDSCJ, Mar 31, 2017
    #9
  10. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Thanks Sid :)

    According to the 6 volt wiring diagram one of the cut wires came from the ignition & the other went off to the coil.
    [​IMG]

    H.

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #10
  11. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    And just for fun-

    upload_2017-3-31_21-15-13.png

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #11