1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pinion Yoke?

Discussion in 'Early CJ5 and CJ6 Tech' started by Alan F, Jun 26, 2016.

  1. Alan F

    Alan F Sponsor

    Will a D30 pinion yoke fit a D27 housing?

    Background: want to upgrade '67 CJ5 with v6 from 1100 series ujoint in front to 1310. My pinion gear has 26 splines not 10. Can't find 26 spline by application for D27. Found some information to suggest that D25, 27, 30 and 44 all interchange. Trying to confirm. Thanks!
     
    Alan F, Jun 26, 2016
    #1
  2. nickmil

    nickmil In mothballs.

    No. See my reply and pic in this thread Dana 27 Front Driveshaft Discussion...

    The 27 is an oddball with a different depth.
    Scout 800 and 80 with the 27 is a good source for that yoke that accepts the 1310 u-joint.
     
    nickmil, Jun 26, 2016
    #2
  3. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    Uh-oh. Not sure what I sent along to the guy who is setting up my gears. Might have sent a 44 yoke. Anyone get a measurement on the 27 yoke....overall length?
     
    wheelie, Jun 26, 2016
    #3
  4. Alan F

    Alan F Sponsor

    Alan F, Jun 26, 2016
    #4
  5. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    Alan, can you measure the overall length of that yoke for me?
     
    wheelie, Jun 29, 2016
    #5
  6. Alan F

    Alan F Sponsor

    image.jpeg Yes, it just arrived yesterday and is dimensionally correct replacement for the smaller yoke.
    Hot off the press.
     
    Alan F, Jun 30, 2016
    #6