The Official "What The Heck Is This?" Thread

Hood bumper 5761372


About 3/4" diam across the face.

 

My bag has a thick linear area on the back side for abrasion. I also have its mount from that fender. These bumpers were not located at that area. Very close to same area though.

 

Floorboard plugs? I think my Jeep has some.

 

My 71 doesn't have anything like that. Welting on the grill, the wash reservoir was originally a polyethylene bag. Those are not stock I'm thinking.

 

What's this set lever supposed to do? I pull it but the seat doesn't move forward/backward or up/down

 

What the heck it is supposed to be is an alternator bracket. How the heck it goes together is the question. Buick 231.

 

Looks more like a power steering pump bracket to me.

 

well that would be awesome but I’m still not seeing how it goes together.

 

Must belong to this

 

Well I tried again with a spare pump I have and I couldn’t get anything to line up.



but the large part does bolt up to the alternator side just right.

 

I know, but the bolt holes only line up like this. NAPA is open tomorrow so I’ll go ahead and buy an Alternator. I’ll have to drive into town for some long *** bolts to.

 

looks like a bracket for AC compressor and alternator
from a 80's oldsmobile

 

got any photos?

 

Hello, I am coming from Toyotas and almost completely new to early jeeps.. I recently bought a nice and fairly built Jeep. There is a knob on the dash just above the emergency flashers that pulls out but doesnt seem to do anything. So 2 questions. 1) Is it stock 2) if so what is it supposed to do?



Here's the new to me Jeep.

 

Ejection Seat of course.

 

Activates the oscillation overthruster.

 

1) No stock ivory/white switches in that location. 2) May have to trace the wires to see if they really go to the ejection seat, or oscillation overthruster.

 

Thanks. This is mainly what I was looking to find out before I started digging.