First overdrive...what parts are missing.,,,

Got a great deal on an overdrive...can you all look at the pic and tell me what I'm missing...
Other than a new gasket and knob...copper washers on the bolts?

 

Appears to be 26 tooth.
Verify spline and tooth count for your application.
Shift rod/lever appears to be for T90.
Although the overdrive lever bracket that bolts to the transmission top cover is missing.
One of the wide head clevis pins is missing as well.

 

thanks...it is 26 tooth and its going in my 2a (put it here as this forum gets more traffic)...any clue where the circle snap ring goes?

 

From what I can see it is missing a shipping box and the label with my address on it.

Sorry I'm not more help.

 

All the installation instructions are listed at hermtheoverdrivguy.Com. Always best to go through it before you install it. The lock washer and snap ring will make a lot more sense once you read the instructions.

 

r)

 

Herm's instructions are not complete. I just installed Advanced Adapters Overdrive. I have the complete instuction that also include total disassemble. I can scan it if you need it.

 

Missing a longer bolt? I don't recall the e clip.... Not sure that goes to the OD. And as mentioned the clevis pin and mount bracket for the shifter.

 

The small circular snap ring holds the shift lever onto the shift pivot bracket.

 

Scott , if you want to scan it....sure! Guess I'll have to fab a bracket....not complaining at $450 delivered!!

 

That's a good price....you can download the installation instructions on the Advance Adapter site.