1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 Air Cleaner Options

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Feb 14, 2015.

Thread Status:
Not open for further replies.
Page 2 of 5
  1. chipdom

    chipdom Member

    I purchased an origional oil bath air cleaner on ebay which the element was falling apart, they come up occasionally. I cut the element off about an inch from the top and replaced it with a K&N filter, the top squeezes it to the bottom for a good seal. It works great and looks origional. I dont remember the part number for the filter but I found it by researching the size on the K&N site. If you have trouble with the part number let me know, I should have the recipt somewhere. I think it fits a mini cooper or some other british car, I cant remember.
     
    chipdom, Feb 19, 2015
    #21
    Brian Carothers likes this.
  2. WYOMIKE

    WYOMIKE Oct 1971 pic

    WYOMIKE, Feb 20, 2015
    #22
  3. Focker

    Focker That's a terrible idea...What time? Staff Member

    Thanks Wyomike.
     
    Focker, Feb 20, 2015
    #23
  4. SuperTodd

    SuperTodd Member

    had an oil bath on my 70, but found a 71 jeepster dry element housing w v6 sticker on it
     
    SuperTodd, Feb 21, 2015
    #24
  5. Focker

    Focker That's a terrible idea...What time? Staff Member

    I received the air cleaner today, after it was held hostage at the FedEx facility over the weekend. It's perfect, I'll definitely need a spacer tho. A local Jeep guy is a student at a machine school and the instructor encourages them to find their own projects. He's going to use the plans posted in the thread and make me one...Win, win!
     
    Focker, Feb 24, 2015
    #25
  6. nickmil

    nickmil In mothballs.

    Have him make a dozen out them up for sale. Bet they sell quick if priced reasonable.
     
    nickmil, Feb 24, 2015
    #26
  7. WYOMIKE

    WYOMIKE Oct 1971 pic

    I noticed that my dim. are smaller then Homerdogs, wonder if I goofed on my dwg. That was a long long time ago. I will check it this weekend:?
     
    WYOMIKE, Feb 24, 2015
    #27
  8. Focker

    Focker That's a terrible idea...What time? Staff Member

    In order for the Buick air cleaner to clear for my application, the height of the spacer will have to be changed to 1-3/4".
     
    Focker, Feb 24, 2015
    #28
  9. Focker

    Focker That's a terrible idea...What time? Staff Member

    Well I ended up making my own spacer for $3 out of an exhaust pipe connector from AutoZone. The parts guy thought I was a weirdo. I had my air cleaner in hand but was playing around in the exhaust area. I love one offs!
    [​IMG]

    It's not pretty but it works great. I used my grinder and a 4-1/2" cut off wheel.
    [​IMG]

    I basically cut slits all the way around, folded every other tab one in and out. I cut off the outer tabs to make a lip for the air cleaner to sit on.
    [​IMG]

    The bottom of the air cleaner housing.
    [​IMG]

    The inner tabs snap inside perfectly...It actually makes a snap sound.
    [​IMG]

    Plenty of clearance.
    [​IMG]
     
    Focker, Mar 9, 2015
    #29
  10. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Very Cool!!
     
    ojgrsoi, Mar 9, 2015
    #30
  11. Zoomer

    Zoomer eJeeper (walking)

    Does it seal between the spacer and air cleaner housing?
     
    Zoomer, Mar 9, 2015
    #31
  12. Focker

    Focker That's a terrible idea...What time? Staff Member

    Does it need to?
     
    Focker, Mar 9, 2015
    #32
  13. Zoomer

    Zoomer eJeeper (walking)

    Does it allow dirty air to bypass your filter element? May not be very significant if it fits tightly and seals pretty good. OEM one actually has a gasket that seals the riser to the air cleaner assy.

    [​IMG]
     
    Zoomer, Mar 10, 2015
    #33
    Dauntless1971 likes this.
  14. Focker

    Focker That's a terrible idea...What time? Staff Member

    Maybe I could seal with a quality silicone or weld?
     
    Focker, Mar 10, 2015
    #34
  15. Danefraz

    Danefraz Well-Known Member 2023 Sponsor 2022 Sponsor

    J-b weld might be easy.
     
    Danefraz, Mar 10, 2015
    #35
  16. Focker

    Focker That's a terrible idea...What time? Staff Member

    I have a very good grade silicone that I've used on my pool pump. It holds up to heat etc..

    JB Weld is a good idea too.
     
    Focker, Mar 10, 2015
    #36
  17. ETZFAM

    ETZFAM FLATIES & ROUND FENDERS, SOME EVEN RUN

    ETZFAM, Jan 12, 2017
    #37
  18. Focker

    Focker That's a terrible idea...What time? Staff Member

    $65!!! Ouch :shock:
     
    Focker, Jan 12, 2017
    #38
  19. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Twin2, Jan 12, 2017
    #39
  20. Warloch

    Warloch Did you say Flattie??? Staff Member

    At least now I know how much to charge for the one out in my parts bin :) Dang...
     
    Warloch, Jan 12, 2017
    #40
Page 2 of 5
Thread Status:
Not open for further replies.