1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ordering a lift..frame bushing question

Discussion in 'Flat Fender Tech' started by all4jpn, Apr 26, 2014.

  1. all4jpn

    all4jpn Member

    going to be ordering the 1" superlift for my 2a. I also have a set of new "H" shackles I got from a member here. Question I have is what to do with the frame bushings. Do I just re-use stock frame bushings (guessing they will be to large in the center) or?...recommendations?..cj-5 bushings?
     
    all4jpn, Apr 26, 2014
    #1
  2. Warloch

    Warloch Did you say Flattie??? Staff Member

    Daystar ane Energy Suspension, Rancho, Pro Comp - any of the good name brands are fine. You do need to remember to get the metal bushing out of the inside of the mount (do a search).
     
    Warloch, Apr 26, 2014
    #2
  3. WorkInProgress

    WorkInProgress Member

    I bought the SAE harbor freight bushing installer remover kit for like $15 and I am pretty happy with it if you don't have one yet. I used to use sockets but since my box isn't well organized I used to take a long time just finding the right socket.
     
    WorkInProgress, May 2, 2014
    #3