1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1973 CJ 5 Trail Rig

Discussion in 'Builds and Fabricators Forum' started by CJ5Kyle, Jan 28, 2013.

  1. CJ5Kyle

    CJ5Kyle Member

    Honestly I haven't touched it in a few weeks. Giving it the silent treatment lol
     
  2. CJ5Kyle

    CJ5Kyle Member

    Still haven't touched my jeep in weeks sadly :(

    Took on coaching my son's baseball team and it's eaten up most of my time
     
  3. piffey263

    piffey263 Active Member

    That's a good reason not to touch jeep for a while, get to spend time with your son.


    Sent from my iPhone using Tapatalk
     
  4. CJ5Kyle

    CJ5Kyle Member

    Yeah it's been a blast so far man. But I really want to get back to work on it! I wanted to use it this summer before the baby comes. I'll get to work on it soon. I also injured my knee at work and it's still been healing up so I can only stand on it for so long.
     
  5. Danefraz

    Danefraz Well-Known Member 2023 Sponsor 2022 Sponsor

    I trade a lot of 'work on jeep time' for 'play with daughter' time. I say the same for 'spend time with family.'

    Been trying to keep at it 5 hours a week or so just to make some progress. Some weeks, more, some less.

    Transmission / transfer case / OD taking way to long, but are being done at the speed of 'family.'
     
  6. CJ5Kyle

    CJ5Kyle Member

    Finally worked on the jeep a little yesterday. Got the carb off and intake manifold off. Only to find small deposits of oily water under the valley pan. So my prediction could be true. Could just be a head gasket issue but my motor could also be close to toast if water has been getting into the piston chambers. Guess I'll find out more when I get the heads off
     
  7. tarry99

    tarry99 Member

    Hi Kyle,............Could be condensation , could be a cold water leak, you can pressurize the cooling system and see if it holds pressure and you can leak down the cylinders and see if you have any leaks there........or take them off!