There's some good info here https://www.willysjeepparts.com/Ring_And_Pinion.htm Looks like a 25 ring gear is 7-3/4" OD
Oh, don't I know it.
Paint progress: I worked on the driver fender after work, several days this past week. A little body work to fix a wrinkle I did in the 80's...
Thanks for your comments, all true. Paint is really expensive now, and a paint job by a pro, I don't even want to know... So that's why I'm trying...
I think we need more tuxes on the trails. The way I see it, and what led me to build up my dad's handed-down tux for my son to wheel on the...
I know we drive slow, but not slow enough to not shake it up. It would be drinkable in about a month.
One last item to address before I go out on a test run this weekend. Last year after the overdrive installation, I was experiencing oil travelling...
Yes, they are 19 spline inner, 27 spline outer. Long side 31-9/16", short is 23-3/16". The center of the seal surface is 7-1/2" from the outer end.
I removed the carrier from the housing, (a little loose on the preload btw) and knocked the pinion out. Cleaned out the housing and gasket...
I looked them up, 180,000 psi tensile strength. I'm thinking other stuff is going to break first.
Yes, the spindle could be installed over the 1.220 outer spline. But what a PIA if you broke one and had to disassemble the whole thing to get the...
Separate names with a comma.
