The problem is i am changing them out at one of those pay by the hour garages that have a lift and a press. i need all the parts to do the job...
Still needing some help. I looked at several different vendors for the OE spring bushings ordering several different part numbers. Is the eye...
try this http://www.mtscompany.com/
so looking at all the websites i am a bit confused. Crown ( not my first choice but all i can find that's OE type) list a front and a rear with...
74 here and looking to replace all the spring and shackle bushings. I'm having trouble locating all the bushings at one place so was looking...
looking to change out the power steering gear in my 74 cj. After having some bad experiences with rebuilt parts. i.e. master cylinders, fuel...
how do they mount to the fender? I would like to install new ones. I have holes on the lip inside the wheel wells and don't want to drill any new...
Camco 210 Plastic Cleaner/Polish - 14 Oz. Aerosol-40934 - The Home Depot not the cheapest stuff in the world but it does a really good job on...
a must check item. when mine went bad I knew it as "molten" metal from the dimmer wire fell down on the top of my foot as I was driving down the...
one more thing. makes crazy power but if it does have a failure standard GM parts will fit and get you home
Ok i agree they are pricey but the customer service is amazing and the unit is turn key. one wire and your done. i have an older deadrise boat...
Done, Eric with MTS hooked me up with new hoses and body grommet and only took a few days to get here.
if you will send a post a pic of the original 74. i have always suspected mine is not stock, thanks
Separate names with a comma.