Holley Red with a pressure regulator set at 2.5lbs for the Weber DGV on my 134L Pump is mounted on the backside of the riser with the inlet and...
DID you test it before putting it in? did you adjust the swing?
On the jeep in my avatar 134L T-90 D-18 D-41/25 warn hubs. Dad took the pill out of the transfer case to allow him to better pace Marching bands...
LOL Sorry did not see where it was a Kaiser Jeep the forum was Early Jeep Restoration and Research to me that means Early Jeep as in Willys Had I...
The Differential takes a hypiod gear oil 80-90wt the knuckles take either home brew knuckle pudding (50/50 wheel bearing grease and 80-90wt) or 0...
Cooler were common back in the day
You can paint the dash grab handle any color you want as they were not a stock item. Windshield frame is body color.
nope I have excellent reading comprehension. I was giving one of those almosts just in case someone wanted to know. As to not using Ford parts on...
Daryl an exception to this is the 1977ish RUG 4 speed Ford used in the Granada and Merc Monarch it has a 18% OD in the fourth position and a real...
I'm curious you say you want to build this block back into the engine it was originally (if it was a 59 FI 283) then I have a question. DO you...
Could be on a CJ-5 my Jeep is a CJ-2A body so side to side is stock. I used the Original Cleats welded to the Tunnel and Side wall for the anchor...
I saw one of these things on facebook where it listed 10 jobs that no longer exist. One of them was SODA JERK I call bull, the job still exists...
I cut mine on my bandsaw. Here is the finished Fuel tank strap [img] I used 16ga and scratch made the tubular turnbuckle luckily I already had...
OK they never cleared that with me LOL. I think I had heard of them a while back but based on the prices I lost interest.
Who is selling this Swag Brake? is it a Harbor freight product?
Separate names with a comma.