Nice, I just received a Powrlok in the mail for my 27
I think the yellow dash is right on. Here is pic of my 67 dash with electric wipers, and the flat sided hole to the right of the column for a...
[ATTACH]
[ATTACH] Here is a picture of a Herms Steering Box adapter plate. It is a well made, respected part, and he simply welds heavy wall tubing on,...
Smith Brothers Pushrods in Redmond Oregon makes a nice set of adjustable pushrods for the 225
I did the "broomstick" check of the drag link & tie rod & it looks good, even without going to high steer. It gets pretty close to the upper part...
I think with the Scout II box, the steering shaft will still be conflicting with the exhaust manifold. Aside from that, yes, it looks very similar...
So, I'm having trouble getting this Mustang steering box out of my head. It fits really nice. It needs no plate, just tubes through the frame for...
It could, I'll just have to get a hold of one & set it in place & see
It doesn't look real big - could be an issue. The Mustang weighed 2800 lb, but as you say, wasn't used as hard.
Looks like the "low performance" Mustang used a 19.9-1, which equates to 4 5/8 turns, now I just need to find one to lay up there and see if it's...
Yes, Definitely want to be able to turn it ! Like I say, looking at the pictures of the box, it looks like a home run, but ?............
Okay, I managed to resize and post a pic. Is an actual Jeepster manifold shape more compatible ? In the post above, you can see how the Mustang...
[ATTACH] [ATTACH] Okay, I decided to go with the Herms plate and a manual reverse rotation box. I decided that this would be the way to go, as I...
Separate names with a comma.