1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear bumpers

Discussion in 'Early Jeep Restoration and Research' started by Ducks-Bass-n-Jeeps, Oct 29, 2004.

  1. Ducks-Bass-n-Jeeps

    Ducks-Bass-n-Jeeps A Parade of One

    What was the original rear bumper set up for a 64 CJ-5.

    I just took my rear winch off and weighing my options for what to put in its place.
     
    Ducks-Bass-n-Jeeps, Oct 29, 2004
    #1
  2. Boyink

    Boyink Super Moderator Staff Member

    Original would have been a drawbar (the angled piece with holes for attachments) attached to the rear crossmember. Kinda neat looking, but hangs down a bit more than preferable for 'wheeling.
     
    Boyink, Oct 29, 2004
    #2
  3. John A. Shows

    John A. Shows Comic Relief

    Not even bumperettes? I thought those were at least an option.
     
    John A. Shows, Oct 29, 2004
    #3
  4. sparky

    sparky Sandgroper Staff Member Founder

    Drawbar unless a Tux IIRC.
     
    sparky, Oct 29, 2004
    #4
  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    The chrome bumpers (ala Tux) were available as an option on the intermediates. They're out there if you look long and hard.
     
    timgr, Oct 29, 2004
    #5
  6. jd7

    jd7 Sponsor

    bumperettes origional on military and available on civilian IIRC they were used along with the drawbar.
     
    jd7, Oct 29, 2004
    #6