1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Gas filler neck relocation

Discussion in 'Intermediate CJ-5/6/7/8' started by CJ5Doc, Jul 27, 2010.

  1. CJ5Doc

    CJ5Doc Member

    I am in the process of bodywork on my 75 CJ5 and am considering moving my filler neck to the rear right quarter panel. Has anyone done this modification or seen it done?
     
    CJ5Doc, Jul 27, 2010
    #1
  2. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    not sure what yours looks like....when I put the Wrangler tank in the 6 to get a in tank pump for my efi I simply cut a hole to size and bolted it on
    [​IMG]
    Jim
     
    bkd, Jul 27, 2010
    #2
  3. CJ5Doc

    CJ5Doc Member

    anyone use the stock tank and put the filler on the right side?
     
    CJ5Doc, Jul 29, 2010
    #3
  4. DREDnot

    DREDnot Not new to JEEPS

    I've seen pics of it.
    It looks just like the above pic but on the other side.
    Nothing complicated, you just need to find the proper hoses that "S" straight out without the 90 degree bend toward the back
     
    DREDnot, Jul 29, 2010
    #4
  5. Boyink

    Boyink Super Moderator Staff Member

    I had the filler on the right side on my CJ 6. Tank inlets were on that side. I just bought flexible fuel pump hose and it was an easy run.
     
    Boyink, Jul 29, 2010
    #5
  6. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    where did you find filler hose been looking cant find any large enough...
     
    sterlclan, Jul 31, 2010
    #6
  7. Boyink

    Boyink Super Moderator Staff Member

    I found a local industrial hydraulic parts supplier.
     
    Boyink, Jul 31, 2010
    #7
  8. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    gas didn't eat the hydraulic hose?
     
    sterlclan, Aug 1, 2010
    #8
  9. Boyink

    Boyink Super Moderator Staff Member

    It was fuel pump hose purchased at a business who mainly did hydraulic hose work.
     
    Boyink, Aug 1, 2010
    #9
  10. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    timgr, Aug 1, 2010
    #10
  11. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    had no luck at the boat yards or parts store nothing that big... need the filler hose for a 74 mine has givin up
     
    sterlclan, Aug 4, 2010
    #11
  12. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Factory setup?

    http://www.mtscompany.com/jeep.htm If MTS has them, others will. AFAIK the only parts that are not available are the bulkhead fitting in the hose and the filler neck (at the gas cap). The '76 overflow tube will work if you cut it. IIRC.
     
    Last edited: Aug 4, 2010
    timgr, Aug 4, 2010
    #12