1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

heater controls

Discussion in 'Early CJ5 and CJ6 Tech' started by 66cj5, Oct 20, 2004.

  1. 66cj5

    66cj5 Jeep with no name

    any ideas on how the controls are set up? also any part numbers for the hot/cold lever, and a fan switch. thankx.
     
    66cj5, Oct 20, 2004
    #1
  2. dg69

    dg69 New Member

    the parts are hard to find. i rebuilt the blower switch. not all that hard just time.

    the push buttons go off, air and defrost.

    good luck

    [​IMG]
     
    dg69, Oct 20, 2004
    #2
  3. 65CJ5

    65CJ5 Member

    There's a good pictorial drawing of the vac hose hookups in the Haynes manual. I think it's the Haynes manual...

    Stan
     
    65CJ5, Oct 20, 2004
    #3
  4. 66cj5

    66cj5 Jeep with no name

    thankx guys. heat is our friend in the winter.
     
    66cj5, Oct 21, 2004
    #4
  5. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    there is someone here that rebuilds the heater controlers, he was gonna do mine. i cant rememebr who, it might have been brad but im not sure. who ever it was answered all my questions for me
     
    dauntless_powered, Oct 21, 2004
    #5
  6. 66cj5

    66cj5 Jeep with no name

    contols seem to work. just replacing vacuum lines and wondering what does what.
     
    66cj5, Oct 22, 2004
    #6
  7. John A. Shows

    John A. Shows Comic Relief

    Yes...Haynes has a perfect diagram. There's only 3 if I recall. One through the firewall to the vacuum port on the rear of the intake. Another to the defroster duct and another to the heat flap inside the defroster duct.

    Then the temp slide is a bowden cable to the air box outside the firewall on the pass side.
     
    John A. Shows, Oct 22, 2004
    #7