1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

v6 gas tank

Discussion in 'Early CJ5 and CJ6 Tech' started by mdmeltdown, Feb 20, 2010.

  1. Patrick

    Patrick Super Moderator Staff Member

    Yes.
     
  2. Patrick

    Patrick Super Moderator Staff Member

    Looking at mine, I'm not sure you could actually damage that tank, short of a saw blade or drill bit.
     
  3. Patrick

    Patrick Super Moderator Staff Member

    I'll try to remember to get a pic tomorrow.
     
  4. cj6/442

    cj6/442 Sponsor

    well ,like I said ,I didn't like it .maybe i had an older model , tank was fine and I loved that it will not get pin holes of rust ,just I did not like the neck to tank, looked like the neck was not glued on there well enough for me .

    thanks pat ,a sealed gas cap is next on the list ,
     
  5. Patrick

    Patrick Super Moderator Staff Member

    Mine isn't glued on. It's molded as part of the tank.
     
  6. cj6/442

    cj6/442 Sponsor

    well the one I had was MTS must have been a first run possibly , then never mind what I said ,sorry to mislead you guys .goodnight.
     
  7. a-fisherman

    a-fisherman New Member

    Right along the same lines I have questions on a tank installation. I have a 68 CJ5 with under the seat 10 gallon tank. I picked up a 15 gallon tank from an 84 CJ7. I got the fill lines, fill bezel, and skid plate. I know I'll have to remove the "A" frame from the rear frame and cut out for the fill hoses to install:?:?. What other challenges will I face with respect to fuel line, return line , and sending unit?
     
  8. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

  9. Patrick

    Patrick Super Moderator Staff Member

    :?
     
  10. alex211

    alex211 Member

    Where can I get a sending unit for my under seat tank? I have a V6 with the locking ring type sender.
     
  11. Patrick

    Patrick Super Moderator Staff Member

    Have you checked Walcks, Krage, Turner, etc.?
     
  12. alex211

    alex211 Member

    I guess I will. Are the senders they sell now a days good quality or chinese junk that won't work more than a year?
     
  13. Patrick

    Patrick Super Moderator Staff Member

    Don't know. I put a NAPA branded universal in mine about 12 years ago and it's still working.
     
  14. alex211

    alex211 Member

  15. mdmeltdown

    mdmeltdown Member

    So are there v6, locking ring type STEEL tanks available?