1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Vacuum wiper setup

Discussion in 'Early Jeep Restoration and Research' started by John O, Aug 23, 2009.

  1. John O

    John O Member

    Hey all.
    Finally sick of my crappy electric motors, I want to go back to the stock vacuum setup but since the vacuum setup wasn't on the Jeep when I got it I know I'm missing stuff. All I really got is 2 motors that I rebuilt.
    Anyone have any good pictures of how these bolt up and possibly anyone have the parts??
    John O
     
    John O, Aug 23, 2009
    #1
  2. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I just did a search (from the top of this page) vacuum wiper motors and got pic's and a whole lot more. Great info there and gives you links to a whole lot more. HTH
     
    Walt Couch, Aug 23, 2009
    #2
  3. John O

    John O Member

    I've seen some of those pics. But I guess what I'm wondering is if there is a spacer that holds the wiper motor out so it fits against the top rib of the windshield frame. What does it look like? I got the motors upside down and mounted flat against the windshield but it doesn't seem right.
     
    John O, Aug 23, 2009
    #3
  4. johnny and sandy

    johnny and sandy Member

    Hi John
    You will need the vacuum wiper motor brackets, spacers, six hose clips, one on the front fender and five on the windshield frame, a hose splitter, and also a double action fuel pump. If you send me your email address i well send you detailed photos. Jon Lilley :tea:
    My email address is JonLilleyStudios @ aol.com
     
    johnny and sandy, Aug 25, 2009
    #4