1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

95 cherokee ps work for 62cj5??

Discussion in 'Builds and Fabricators Forum' started by jccity6, Aug 17, 2009.

  1. jccity6

    jccity6 knucklehead

    How much fabrication will it take to make this work in my Willys? I already have a Saginaw box on my rig.
    thanks gang
    JC:flag:
     
    jccity6, Aug 17, 2009
    #1
  2. featured

    featured Member

    Interesting. I`ll follow this thread as well. I really like my Manual steering for now but if that ever changes I got a complete 1992 cherokee I can rob stuff off of.
     
    featured, Aug 18, 2009
    #2
  3. jccity6

    jccity6 knucklehead

    Yeh, I'm really not sure if I will even use it but I can get it all for 35 bucks including the shaft. Just dont know if I need it since it will be probly 70% street and 30% trail. Never had (or rebuit) a Jeep before.
     
    jccity6, Aug 18, 2009
    #3
  4. jccity6

    jccity6 knucklehead

    Just so everyone knows, I went ahead and bought and it seems to fit with very little alteration. I only used the gear box and kept the original shaft because the 95 shaft was only 23 inches and therfore too short. I just need to find some hoses and it will be good to go.
    One last note, I actually need to get a double crank pulley also. THEN, I will be good to go
     
    Last edited: Aug 19, 2009
    jccity6, Aug 19, 2009
    #4
  5. Dan66cj5

    Dan66cj5 Member

    I use the same type of power steering pump on my CJ5, and changed it over to have a remote reservoir. Also swaped the pulley over to use a v-belt, I found one at a junkyard for it. Its a great little pump.. very compact and cheap to replace.
     
    Dan66cj5, Aug 20, 2009
    #5