1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Mopar 8 3/4 Posi

Discussion in 'Early CJ5 and CJ6 Tech' started by dal290la, Feb 7, 2009.

  1. dal290la

    dal290la New Member

    What is a Mopar 8 3/4 diff? What would a posi unit from that differential fit in? D44, D27???
    I could go online and look for an hour, but I know many of you out there know the answer.

    Thanks
     
    dal290la, Feb 7, 2009
    #1
  2. rockcrawler

    rockcrawler New Member

    this is a factory rear gear 8 3/4 ring gear as far as I know they have nothing in common with any jeep rearend.
     
    rockcrawler, Feb 7, 2009
    #2
  3. dal290la

    dal290la New Member

    Ok thanks, that is what I thought.
     
    dal290la, Feb 7, 2009
    #3
  4. nickmil

    nickmil In mothballs.

    If the 8 3/4" has a sure grip limited slip then you can use the guts from the sure grip in a Dana 44 Powerlock. They use 30 spline side gears and it used to be common to rob the guts from the sure grip to convert a 19 spline powerlock to 30 spline. Nickmil
     
    nickmil, Feb 8, 2009
    #4