1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Front Disc brakes

Discussion in 'Early CJ5 and CJ6 Tech' started by charlie, Jun 25, 2004.

  1. charlie

    charlie New Member

    If all goes well I will have my narrowed 44 for the front of my 2A soon. Which brings me to my question, is there a good master cyl to use in the place of the stock one? With the larger demands of disc brakes (chev) I know I will need more fluid but do not know where to start.
     
    charlie, Jun 25, 2004
    #1
  2. Posimoto

    Posimoto Hopeless JEEP Addict

    Posimoto, Jun 26, 2004
    #2
  3. jpflat2a

    jpflat2a what's that noise?

    I have been using the stock m/cyl on my disc brakes, with no problems
    I don't know of any bolt on, due to the uniqueness of the cylinder
    you can look here; www.hermtheoverdriveguy.com
    vanguard installed one of these kits
     
    jpflat2a, Jun 26, 2004
    #3
  4. nickmil

    nickmil In mothballs.

    I run 4 wheel discs with the Chev calipers. I stepped up to a Willys Wagon/Pickup master cylinder. It has a larger bore size to push more fluid and it bolted right on. I had to do some line mods but was really quite easy. I've used this set up for about 8 or 9 years now with no problems. I will be going to a dual reservoir system in the future with hanging pedals, but this has worked great for me. Nickmil.
     
    nickmil, Jun 28, 2004
    #4