1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Help finding grommet for intake

Discussion in 'Intermediate CJ-5/6/7/8' started by halflifesw, Jun 26, 2007.

  1. halflifesw

    halflifesw A-10 Crew Chief

    Hello all. I need help locating a grommet for an AMC v8 intake. Its for the hole in the rear part of the intake, behind the carb. It has a little check ball valve that is in the 3/8 line that runs up to the front of the carb. I have an Edelbrock Torker manifold, probably same size hole as stock one? I had the grommet in the back of my bike but it must have fallen out on the way up to town, stupid me. I couldn't find anything similar at the auto parts store anyways.:cry:
     
    halflifesw, Jun 26, 2007
    #1
  2. halflifesw

    halflifesw A-10 Crew Chief

    I found a website that says Chrysler p/n J4006019?
     
    halflifesw, Jun 26, 2007
    #2
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    timgr, Jun 26, 2007
    #3
  4. TheBeav1955

    TheBeav1955 Member

    That would be the gromet for the PCV I think try using that in your search.
     
    TheBeav1955, Jun 26, 2007
    #4
  5. jpflat2a

    jpflat2a what's that noise?

    that is the correct part number
     
    jpflat2a, Jun 26, 2007
    #5
  6. Dave in Houston

    Dave in Houston Member

    I found one on Ebay.
     
    Dave in Houston, Jun 26, 2007
    #6