steering column

i need help repairing my steering column i took it apart a few months and cant remember how to put it back together i have few spring still out and the blinker switch need to be put back in can anyone help me?
Thanks
Garland

 

year
make
model
????

 

its a 77 CJ 7 hard top

 

This thread will probably be moved shortly but do you have any pics. That'll make it easier to help.

 

pictures of the Jeep?

 

Pics of the column and parts that you need help with.

 

i can take some tomorrow

 

{moved to proper forum}

manual trans or auto ?
tilt wheel or not ?

 

There is a web site I found like a million years ago... was a corvette forum but it had very good pictures of the whole GM column breakdown and disassembly and assembly instructions. May try google with corvette steering column repair or something like that. I found this;

http://img303.imageshack.us/img303/607/diagramzy3.jpg

 

here are the pictures you asked for i hope i done it right if not my email is peebles@pineland.net

 

3 speed manual trans withno tilt wheel

 

went a little too far for just ign cyl replacement

 

I could put it back together for you in about 20-30 minutes...
to try and type the instructions here....well, it would be like writing a book.
the release lever arm and spring will go into the housing
then the housing is placed over the comlumn and bolted into place.
did you use a fish wire when you removed the turn signal switch ?
if not, then before you bolt the housing up, slip the harnes back down thu the column; this might take some time as you don't want to pinch the wires.
once you reach that point, the diagram should help from there.
you might have to do a net search for a more detailed word by word, step by step, as the other member made mention of
good luck, take your time