1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

carb rebuild diagram

Discussion in 'Early CJ5 and CJ6 Tech' started by dauntless_powered, Oct 1, 2006.

Page 2 of 2
  1. jpflat2a

    jpflat2a what's that noise?

    x2
     
    jpflat2a, Oct 1, 2006
    #21
  2. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    the float will not go in the other way???? There is a little tab on it that wont let it hinge pass the needle assy. plus it looks to me like the instructions and my diag show that "notch" facing away from the power piston...im confused
     
    dauntless_powered, Oct 2, 2006
    #22
  3. sparky

    sparky Sandgroper Staff Member Founder

    Looks upside down to me too.

    Can't you see the little spot in the middle of the tab where the needle previously rode on it?
     
    sparky, Oct 2, 2006
    #23
  4. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    well im just plain stupid:oops:

    hows this look:

    [​IMG]

    [​IMG]

    i guess my other questions are does the big pump return spring just drop in the hole, and the littl pump check ball, does that just go down in that little hole at the bottom of the big hole????? :? i just made no sense huh?
     
    dauntless_powered, Oct 2, 2006
    #24
  5. James P. Enderwies

    James P. Enderwies Sponsor

    James P. Enderwies, Oct 2, 2006
    #25
Page 2 of 2