1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pertronix Part Number.

Discussion in 'Early CJ5 and CJ6 Tech' started by panzer, Mar 17, 2006.

  1. panzer

    panzer Super Mod Staff Member

    Ok. I have been through 2 sets of Pertronix Ignitor Ingitions. Neither one
    fits in the distributor. The numbers I have had sent are from Quadratec:
    Part # 2541 and Part # 1144A.
    Neither one fits. The last choice I see in Pertronix Catalog is Part #1548.
    Is this the one I need??? This has been such a pain and I would like to
    get it finished. Here are a couple of shots on the distributor. Can anyone
    ID the distributor??? And is the part I need #1548?? Thanks for the help.:stout:
     
    panzer, Mar 17, 2006
    #1
  2. kiowamtp

    kiowamtp Member

    I just went through this and in fact mine is in the mail. I bought mine from http://www.geneseeproducts.com. Hopefully it all works out.

    However, I can say that they seem very knowledgeable and helped me ID my dist. According to him (we'll see how well they know there stuff) he stated that if my hold down clips (for the distrib. cap) were fastened by screws then I had an IAY distributor. If they were by rivets then it was an IAD dist. Who knows. But this thread helped me out overall....

    http://www.earlycj5.com/forums/showthread.php?t=15264&highlight=rotor

    BTW yours looks like mine and IAY. I am a "baby" when it comes to JEEPS so I am sure the experts will help out.

    FYI $89.99 through genesee

    Good luck
     
    kiowamtp, Mar 17, 2006
    #2
  3. panzer

    panzer Super Mod Staff Member

    Yep mine looks like the IAY. I guess I'll have to reorder. I don't think
    Quadratec carries it. I'll try Genesse. Thanks Kevin!! This has been a real
    bite!!
     
    panzer, Mar 17, 2006
    #3
  4. kiowamtp

    kiowamtp Member

    YEP, #1548 is what I got. Just received it from the "The Man in Brown Clothes."

    Seems pretty straight forward. I got the coil too. I figured I would swap it all out. I have been trying to get rid of this hesitation in the engine for awhile now. I guess I'll see if it works as well as everyone says it will.
     
    kiowamtp, Mar 17, 2006
    #4
  5. w3srl

    w3srl All-around swell dude Staff Member

    One of the best mods I ever did to my Jeep guys, you won't be sorry! :beer:
     
    w3srl, Mar 17, 2006
    #5
  6. dohc281

    dohc281 It is what it is.

    x2
     
    dohc281, Mar 17, 2006
    #6
  7. panzer

    panzer Super Mod Staff Member

    I've been wanting to do this for about 6 months. Finally got around to
    getting plugs, wires, cap, rotor, coil. Even got points/condensor. Also
    ordered the Pertronix Ignitor. First one was wrong. Sent it back.
    Ordered the second one, it was wrong. I guess the third time is a charm.
    But it's running so good now I was thinking of not putting it on. Finally
    today got to it, and it's the wrong one. So I'll have to send it back and
    order the #1548. Next week I guess.................
     
    panzer, Mar 17, 2006
    #7
  8. Patrick

    Patrick Super Moderator Staff Member

    sweet
     
    Patrick, Mar 17, 2006
    #8
  9. panzer

    panzer Super Mod Staff Member

    Man, Patrick what the hell is your avatar??? Freaky man!!!:rofl:
     
    panzer, Mar 18, 2006
    #9