1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Found out why the jeep was stalling.

Discussion in 'Early CJ5 and CJ6 Tech' started by manden68, Dec 9, 2005.

  1. manden68

    manden68 Member

    Turns out one of the screws that holds down the rotor inside the HEI had backed itself out and danced around inside a while. You can see in the pics that the damn thing is tucked in beside my ignition module.
     
    manden68, Dec 9, 2005
    #1
  2. BlueFlu

    BlueFlu past owner of some ecj5's

    Well never would have guessed that.
    Glad it was an easy fix. ;)
     
    BlueFlu, Dec 9, 2005
    #2
  3. w3srl

    w3srl All-around swell dude Staff Member

    Good thing you found it now, instead of on the way up to da 'Burgh!
     
    w3srl, Dec 9, 2005
    #3