1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

snorkel cutout

Discussion in 'Early Jeep Restoration and Research' started by arts cj5, Jul 20, 2005.

  1. arts cj5

    arts cj5 New Member

    hello has anyone removed a snorkel cutout on the hood ? i would think it is held in place with spot welds but i can' :mad: t see them and i don'T WANT TO MESS this up thanks///art
     
    arts cj5, Jul 20, 2005
    #1
  2. Boyink

    Boyink Super Moderator Staff Member

    I've removed two - one was spot welded, one (military hood) had screws.
     
    Boyink, Jul 20, 2005
    #2
  3. 60CJ5

    60CJ5 Member

    my 60 had screws
     
    60CJ5, Jul 20, 2005
    #3
  4. mb82

    mb82 I feel great!

    My 60 has spotwelds.
     
    mb82, Jul 20, 2005
    #4
  5. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    my 60 has welds.....
     
    blevisay, Jul 20, 2005
    #5
  6. Old Bill

    Old Bill Aggressively passive....

    My '57 has spot welds. You have to get right up in it to see where they're at. A strong light at a low angle might help make them visible. Also, a mirror may help you to see the ones "on top" nearer the crown of the hood.
     
    Old Bill, Jul 20, 2005
    #6
  7. BlueFlu

    BlueFlu past owner of some ecj5's

    Both of my hoods have screws.
     
    BlueFlu, Jul 20, 2005
    #7
  8. digger

    digger Can only wish

    Mine is welded and bolted. Have a feeling PO done one or the other.
     
    digger, Jul 20, 2005
    #8