1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake line vendor??

Discussion in 'Early Jeep Restoration and Research' started by spud, Jun 28, 2005.

  1. spud

    spud Nope..it's not finished!

    Does anyone know who the vendor is for the complete set of steel brake line for the CJ? I checked the tech section with no luck. I seem to remember someone mentioning a company that offered the set for like 125 bucks?? Help!!!
     
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

  3. sparky

    sparky Sandgroper Staff Member Founder

    Walck's 4WD has 'em.

    Others may too, I know Carl does for sure because I bought mine from him. ;)
     
  4. BlueFlu

    BlueFlu past owner of some ecj5's

  5. spud

    spud Nope..it's not finished!

    Thanks guys, that's what I needed. ;)
     
  6. 66cj5

    66cj5 Jeep with no name

    bought the line and bender from flaps. only have about $80 total.
     
  7. sparky

    sparky Sandgroper Staff Member Founder

    Yeah, but how much is your time worth? I've done both. For the whole thing I'll buy prebent again. ;)
     
  8. jd7

    jd7 Sponsor

    I think I will too next time. They look nice.
     
  9. mike@IIM

    mike@IIM Member

    jc whitney has a complete stainless kit for 169.95 p#akk760209wf is advertised in the catalog on my desk. says 67-83 cj's with out power brakes. also 72-83 cj 5's as well as 76-86 CJ7


    They have lots of stainless flex hoses as well.

    I have done the $70 a roll do it yourself jobs. PITA!!! and I broke several flairing tools on the hard stainless. If pre bent is available it is definately worth it to me.
     
  10. Deputy Dave

    Deputy Dave New Member

    i buought my whole set yesterday at thejeep.com hard line and stainless steel soft lines they have all the clips and s lines also
     
  11. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    I was unhappy with my kit from inline. Had to bend several of the prebent lines I paid for. Kinda turned my crank after spending the bucks and still having a few so so looking lines. Just my .02.
     
  12. 66cj5

    66cj5 Jeep with no name

    only took about 3 hours total. however i cheated and bent the lines in place. only tricky ones where the front "s" on the front wheels and the "s" bend in the rear of the crossmember and the $80 bucks also went towards 3 pint bottles of dot 5 fluid.