1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

King Pin Races

Discussion in 'Early CJ5 and CJ6 Tech' started by Timothy Bierley, Aug 4, 2022.

  1. Timothy Bierley

    Timothy Bierley Member

    I have a question I am installing the king pin races and they not going flush with the steering knuckle. There is a very small lip.
     
    Timothy Bierley, Aug 4, 2022
    #1
  2. OzFin

    OzFin Vintage Jeep Guy

    OzFin, Aug 4, 2022
    #2
  3. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Check your Technical Service Manual.
     
    PeteL, Aug 4, 2022
    #3
  4. Timothy Bierley

    Timothy Bierley Member

    Petel. I ordered a TM but has not been received yet. I am ready to start to reassemble the front end.
     
    Timothy Bierley, Aug 5, 2022
    #4
  5. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I'd wait for the TSM. There is a very specific process to adjust the shims.
     
    PeteL, Aug 5, 2022
    #5
  6. Timothy Bierley

    Timothy Bierley Member

    Yes I am going to wait I have other things to do.
     
    Timothy Bierley, Aug 5, 2022
    #6