1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Picked Up Some More Fc Stuff This Weekend

Discussion in 'Jeep Truck and FC Tech' started by jeepermc, Aug 10, 2020.

  1. jeepermc

    jeepermc Active Member

    The weekend was productive. I've been working on some semblance of this deal since about the end of October and it finally happened this weekend. I originally set out to purchase just the rolling wide track chassis, but it changed into a "you gotta buy it all or nothing" deal late last week. Right about 500 miles of windshield time in a 51 year old truck on 37's towing a trailer both loaded and unloaded. At the end of the day I added a truck and a half to the FC Jeep collection. A wide track chassis, a rust free but beat up cab, and a complete truck. The chassis needs a little repair work and the brakes were frozen, the cab is rust free but it looks like someone played kickball with an excavator with it, and the guy cut the back out of the cab to use on another one he's building, and the truck has some fairly significant rust and a hack job V6 added... Lots of good stuff tho too! Old Ford did good but wasn't flawless. Had to change out a U-joint alongside I-90 on the last trip that added about 45 minutes. Luckily the slip yoke on the front shaft is exactly the same as the rear, so I was able to pull both shafts, swap some parts around and keep going. Don't need 4wd for highway towing in the summer!

    widetrack and cab.jpg truck and trailer.jpg FC at build it.jpg
     
    CraigE, Danefraz, fhoehle and 6 others like this.
  2. Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    That's a collection of rigs I can get behind.
     
    fhoehle, ITLKSEZ and jeepermc like this.
  3. Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nice Score ......
     
    jeepermc likes this.
  4. jeepermc

    jeepermc Active Member

    Here's the other two along with the cab and chassis I just picked up. Orange one needs a bath pretty bad.

    FCs at joshs.jpg
     
    CraigE, Danefraz, fhoehle and 5 others like this.
  5. Focker

    Focker That's a terrible idea...What time? Staff Member

    I like everything thing about this thread. (y)
     
  6. Glenn

    Glenn Kinda grumpy old man Staff Member

    Me too! I'm digging the F250 the most. :)
     
  7. OzFin

    OzFin Vintage Jeep Guy

    Nice collection (y)
     
    jeepermc likes this.
  8. jeepermc

    jeepermc Active Member

    I've got plans for that one that include lockers and disc brakes one of these days too. Got most of the parts already, just short on time as always to make things happen. And 38's to replace the current tires. I bought that truck right after I graduated high school....in 96. It's been my daily driver since January.
     
    Danefraz, ITLKSEZ and Glenn like this.
  9. bigbendhiker

    bigbendhiker Member

    Nice fleet of FC's. Good score. Looking forward to this thread!!

    In your signature you have listed a 1966 CJ6 Perkins powered. Any links to info and pics? :drool;
     
    jeepermc likes this.
  10. jeepermc

    jeepermc Active Member

    13 pages of time killing build thread- New Perkins CJ-6
     
    Danefraz and bigbendhiker like this.
  11. colojeepguy

    colojeepguy Colorado Springs

    x2, great ol' truck!
     
    jeepermc likes this.
  12. dozerjim

    dozerjim Member

    x3
     
  13. jeepermc

    jeepermc Active Member

    Well.... The complete truck will run. I'm pretty sure its got an odd fire 231 in it from what I've been able to gather. Got a new fuel pump sitting at home for it now and hoping the carb rebuild kit comes this week also. It may be waiting for me when I get home. The little that I have run it has me concerned that it's mixing fluids, but we'll see what happens when I can run it for more than a minute at a time.
     
    jeepstar likes this.
  14. Andy Weaver

    Andy Weaver New Member

    What is the story on that Barden looking bumper on the bare frame? The one Injust picked up in Idaho has the same type of Bumper, but it is welded to the frame.
     
  15. jeepermc

    jeepermc Active Member

    Couldn't tell ya. I picked this one up in Yakima, WA, so it could be a regional thing. I definitely dig the bumper and will probably re-use it when I get to building. The Orange body should end up on the wide track chassis once I get the chassis and drivetrain sorted out.
     
  16. Dave Deyton

    Dave Deyton Member

    Used to go by a house in Garner, NC and he had 3 FC's in his yard. Always thought, "Man, are those cool!" Always planned to go by and talk to him
    (Counting Cars style), but never got around to it.

    They have since gone away, but I still think they are really cool. Don't see many of them anymore. Glad you are saving the history.

    Hope the builds go well. This could be an interesting thread to watch, keep us informed.


    Dave
     
  17. jeepermc

    jeepermc Active Member

    I've spent a little more time getting the brown truck cleaned up and running. I initially thought that maybe there was a pressure problem with the engine, but a new radiator cap is holding coolant in at operating temp, and there's no mixing of fluids going on. It runs pretty well and I'm fairly certain it is one of the odd fire 231 V6's. Definitely odd fire, and a few clues like paint, HEI, EGR and some other parts lead me to believe I have the displacement correct also. Moving on to brakes this weekend hopefully. Will get the master cylinder pulled and see if I can free it up and do something with it. If not, will order parts next week.

     
    fhoehle, ojgrsoi and Fireball like this.
  18. jeepermc

    jeepermc Active Member

    Whatever type of thread it turns out to be, it will be a slow one. lol
     
  19. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I'll appreciate it, and follow along.

    We need to get the rest of these guys to get an fc!
     
    jeepermc and Fireball like this.
  20. Dave Deyton

    Dave Deyton Member

    Slow progress is fine. A lot of my projects is NO progress.

    Dave
     
    fhoehle and Fireball like this.