Anyone Get Sway Bar To Fit Their 27?

Interested if anyone has bought a roxor sway* bar and installed it on their 27?
Justin

 

The sway bar?

 

Sorry, yes, the sway bar.

 

It can likley be done, but only needed with softer YJ like springs (which the Roxor has). The stiff stock-style springs of the eCJ5s don't really require it.

 

Wow, I haven't been on the forum in a while and this tree grew a Roxor limb. Cool stuff. I drove one when they first came out. Asked the dealer about buying parts and they were like huh?

I am really interested in getting a sway bar for the rear axle. My springs are cj5 and they aint stiff by any means. I've got those new 1" lift springs and the ride has always had pretty bad roll. That would fix that problem. anyone have pics of how that links up and how wide those front D44 axles are?

 

I’d have to go measure but iirc the rear perch is wider like a 76+ CJ5. It’s the front I think people will start drooling over when it catches on.

 

Front axle is basically NT30 width and prepped for YJ spring swap.

I’ll be back home next week if you still need pics

 

I'm doing a M38 build with a Roxor 44 and sway bar. The frame horns on a CJ are higher than on a Roxor, I may have to extend the links.
Jay