1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

74 Random Bump Stop

Discussion in 'Intermediate CJ-5/6/7/8' started by Jason Hammonds, May 15, 2019.

Tags:
  1. Jason Hammonds

    Jason Hammonds New Member

    Greetings fellow Jeepers!
    Anyone have an idea on what these extra bump-stops are? There are bump-stops right over the axle on the frame in another location, so i don't see the need for these.
    Stock springs shown in the photo, but I will be installing Skyjacker 2-2.5" lift soon and id like to know if i can remove these.
    Thanks in advance,
    Jason.
     

    Attached Files:

    Jason Hammonds, May 15, 2019
    #1
  2. Iandavidh

    Iandavidh Member

    Thats the same bump-stop setup on my ‘73. I would just double check that nothing will touch under compression of the suspension before taking those out.
     
    Iandavidh, May 16, 2019
    #2
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    My understanding is they change the angle of the front driveshaft at full compression, preventing it from hitting the starter. They all have them, and are there for a purpose. If it's a V8, you should also have spacers under the right front bump stop, which stops the front axle housing from hitting the oil pump cover. Don't remove those either.
     
    timgr, May 16, 2019
    #3
    Iandavidh likes this.
  4. fesser

    fesser Napa, CA 2024 Sponsor 2022 Sponsor

    Good to know.
     
    fesser, May 16, 2019
    #4