1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Power Brake Bracket

Discussion in 'Intermediate CJ-5/6/7/8' started by icekruiser, May 3, 2019.

  1. icekruiser

    icekruiser New Member

    I got a power brake assembly for a '76 and up CJ5. I know I will need to make modifications based on others that have used it. It came with a bracket to mount between firewall and booster. It seems much easier to not use bracket and mount booster directly to firewall by drilling new holes? Another post mentioned paying attention to stroke ratio. Is this the reason for bracket other wise everything lines up and by adjusting threaded push rod it will attach to pedal. Thanks.
    1972 CJ5
    304V8
    Stock
     
    icekruiser, May 3, 2019
    #1
  2. zila

    zila I throw poop

    Mine has OEM power brakes. It has a bracket.. I believe the bracket is needed to stand the master cylinder off the firewall so it can be attached to the beake pedal arm
     
    zila, May 3, 2019
    #2