1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ignition Key Gas Cap Key Confusion

Discussion in 'Intermediate CJ-5/6/7/8' started by The Wizard, Nov 29, 2018.

  1. The Wizard

    The Wizard Member

    As the title suggests my ignition key and gas cap key are made on the same blank and sometime when in a hurry I try to start the Jeep with the gas cap key or open the gas cap with the ignition key. I have "notched" the gas cap key but I am not always paying attention. I am wondering if it is possible to 1) to modify either the ignition switch or the gas cap so that one key will operate them both or 2) modify one of the key to act as a "skeleton key". It would be nice to reduce the key ring load by one key. Suggestions?
     
  2. Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Re-key the gas cap to the ignition key. A lock smith should be able to do it...

    And Lucky...
     
  3. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Drill a hole in one of them . works for me :D
     
  4. Focker

    Focker That's a terrible idea...What time? Staff Member

    Electronic push button ignition in the dash will solve the problem. :sneak:

    The button fit right in the keyed ignition hole without any drilling. If I ever want to go back to a key...All my wiring was done cleanly as not to ruin the stock wiring. (y)
    [​IMG]
     
    timgr likes this.
  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    So this works with an rf fob like my Cherokee? Cool!
     
    Focker likes this.
  6. Andy Salagaj

    Andy Salagaj Joshua70x7

    Wondering where you purchased this push button switch?
     
  7. Focker

    Focker That's a terrible idea...What time? Staff Member