1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

74 Cj5 Power Brakes

Discussion in 'Intermediate CJ-5/6/7/8' started by linkwhy, Nov 1, 2018.

  1. linkwhy

    linkwhy Member

    Converted over to power brakes with new aftermarket booster master/cylinder everything else new can't get to bleed bled master cylinder all new lines, wheel cylinders,hardware kit tried different ways pumping,vacuum,gravity bleed any other ideas help!
     
    linkwhy, Nov 1, 2018
    #1
  2. Daryl

    Daryl Sponsor

    Did you bench bleed the master?
     
    Daryl, Nov 1, 2018
    #2
    Chilly likes this.
  3. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    bad master?just cause its new don't mean its any good. been bitten by new replacement parts before.
     
    sterlclan, Nov 1, 2018
    #3
    heavychevy and cookieman like this.
  4. Chilly

    Chilly Active Member

    Right there
     
    Chilly, Nov 2, 2018
    #4
  5. scott milliner

    scott milliner Master Fabricator

    This help me.
     
    scott milliner, Nov 3, 2018
    #5