1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roll Bar Interchange

Discussion in 'Early CJ5 and CJ6 Tech' started by jeepstar, May 30, 2018.

  1. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    a local guy has a roll bar from a 68. will it fit a 62?
    upload_2018-5-30_10-21-54.png
     
  2. Focker

    Focker That's a terrible idea...What time? Staff Member

    I'm going to guess yes.

    '55-'71
     
  3. Daryl

    Daryl Sponsor

    Generally speaking 55-75 CJ5 are all the same. The brand of the front hoop can fit better or worse depending on how it was put together. No telling what it was originally built for. Many were universal fit hoops to fit CJ up to 86 and those tend to stick back further due to the 76 and up windshield being tipped back a little bit.
     
  4. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    front hoop does look like it bends rearward . from dash on up
    I would try it on jeep first . drive it over there
     
  5. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    That is not a possibility at this point. It's a 45-minute drive in my modern-day car.
     
  6. SIDSCJ

    SIDSCJ Jeep addict

    No sense of adventure?:D
     
  7. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I still have to get a all new set of tires before I would consider this thing roadworthy. It's more of a hazard to other people than myself at this point. Perfectly fine for bombing around the fields and trails behind my house but not driving down the road.
     
    OrangeCJ5 likes this.
  8. Warloch

    Warloch Did you say Flattie??? Staff Member

    FYI - if you get it, add a stretcher across the front there. Mine sit at the top of the dash/bottom of the windshield.

    Also - yes - if it was built right, it should fit fine.
     
  9. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Whats that?
     
  10. Focker

    Focker That's a terrible idea...What time? Staff Member

     
  11. Focker

    Focker That's a terrible idea...What time? Staff Member

  12. Muzikp

    Muzikp Active Member

    Please tell me you won't rely on that seat belt mounting if you do get the cage.
     
  13. Warloch

    Warloch Did you say Flattie??? Staff Member

    Focker has it - think of a roll where you hit on a corner of the cage - without the stretcher, it folds like a taco. I've fixed several race cars with that issue. The owners could not pass inspections, and I incorporate as much of that as 'reasonable' in my cage designs.
     
    Focker likes this.
  14. PieLut

    PieLut Member

    The spreader up front does add strength to the cage, but keep in mind that it can get in the way of using the windshield latches and block your view of the engine gauges. And depending on the cage design, the spreader can make install/removal very difficult as it prevents any flex on the front hoop to help clear the body. Not trying to scare you away from adding the spreader, but something to think about when designing the cage.
     
    Daryl likes this.