1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1970 Overhaul

Discussion in 'Jeepster Commando and Commando Tech' started by Lazarus, Nov 11, 2017.

  1. Lazarus

    Lazarus New Member

    Neutral safety switch question. Are the two purple wires suppose to share the same post?
    I'm putting mine back together. I took this is a pic off a different jeep for reference. See the purple doubled up, leaving one post empty.
    edit: Or maybe this is wired to bypass neutral?

    IMG_5142.JPG
     
    Last edited: Jan 19, 2020
  2. OzFin

    OzFin Vintage Jeep Guy

    Is this is any help?

    [​IMG]
     
  3. OzFin

    OzFin Vintage Jeep Guy

    It would seem that if the purple wires are doubled up on a single post then the neutral safety switch may be bypassed.
    It could have be rigged to be able to start in gear, that could be useful at select times but potentially dangerous too.
     
    BigcatCommando likes this.
  4. Lazarus

    Lazarus New Member

    OzFin. Yes, very helpful. That picture is great. My service manual wiring schematics are in rough shape.
     
  5. OzFin

    OzFin Vintage Jeep Guy

    Here is another version that shows some more of the staring and charging circuits.

    [​IMG]
     
  6. Lazarus

    Lazarus New Member

    I have another wire I'm trying to chase down. I have a schematic, but cannot find this one in there.
    It is a short Black wire with yellow stripe, coming out of the main bundle, located inside/under the dash. Has the red crimp on the end.
    Could this be a ground to the dash ? This pic is looking up, inside the dash area under the steering.
    IMG_5171.jpg
     
  7. OzFin

    OzFin Vintage Jeep Guy