1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake Light Switch Connectors

Discussion in 'Flat Fender Tech' started by william_cj3b, Apr 22, 2017.

  1. william_cj3b

    william_cj3b 3BOB driver

    I have the female terminal style brake switch on the 3B. I can't find the right terminals to fit. Std 0.156" diameter bullet connectors are too small and the 0.180" ones are too big.

    What are you guys using?
     
    william_cj3b, Apr 22, 2017
    #1
  2. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I'd try the counter-guy at an old fashioned FLAPS.
     
    PeteL, Apr 22, 2017
    #2
  3. garage gnome

    garage gnome ECJ5 welder

    I always used a male brake light switch. The female bullet connectors fit on it perfect.
     
    garage gnome, Apr 24, 2017
    #3
  4. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Threaded screw holes maybe?
     
    Walt Couch, Apr 24, 2017
    #4