1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Timing Gear Tork

Discussion in 'Early CJ5 and CJ6 Tech' started by cpdad93, Jul 5, 2016.

  1. cpdad93

    cpdad93 Member

    I just replaced the timing gear set on the 68 225 oddfire. The spec I found on the tork said 40-55 lbs. That seems like a pretty wide range. Is that correct? Thanks.
     
    cpdad93, Jul 5, 2016
    #1
  2. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    FSM
    camshaft gear to camshaft = 30-40 lbs/ft
    camshaft thrust plate bolt = 20-26 lbs/ft
    crankshaft counterweight bolt = 60-70 lbs/ft
     
    Walt Couch, Jul 5, 2016
    #2
  3. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Note: Vibration damper to crankshaft = 140 minimum lbs/ft
     
    Walt Couch, Jul 5, 2016
    #3