1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

'Jeep' Approved Equipment Decal

Discussion in 'Early Jeep Restoration and Research' started by Uncle Vin, Dec 1, 2015.

Page 1 of 2
  1. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    Does anyone have a decent photo of the 'Jeep' Approved Equipment decal. I would like to see if we can somehow get it reproduced. The enclosed photo is an old one stuck to a Ramsey winch.
     
    Uncle Vin, Dec 1, 2015
    #1
  2. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    from the AMC years . copied from web
    [​IMG]
    [​IMG]
     
    Twin2, Dec 1, 2015
    #2
  3. WYOMIKE

    WYOMIKE Oct 1971 pic

    [​IMG]
     
    WYOMIKE, Dec 2, 2015
    #3
  4. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    I couldn't find that anywhere. Great job Wyomike, and thank you. Now I have to figure out how to make one in sticker or decal.
     
    Uncle Vin, Dec 2, 2015
    #4
  5. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    Just one? There may be some interest in them from other members if you make more. Just saying'.
     
    wheelie, Dec 2, 2015
    #5
  6. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    You can get vinyl & water transfer decal sheets for inkjet & laser printers-

    http://www.papilio.com/

    I've run a few off & had some good results.

    H.
     
    Howard Eisenhauer, Dec 2, 2015
    #6
  7. Old School 64

    Old School 64 Member

    What are the dimensions of the Approved Equipment decal? I may have source that can make them for everyone.
     
    Old School 64, Dec 3, 2015
    #7
  8. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    Looks like Wyomike's graphic is about the right size for a Ramsey winch. Howard, what do you think?
     
    Uncle Vin, Dec 3, 2015
    #8
  9. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Without having my winch/jeep handy here at work I'd venture a guess that that particular decal is about 2" square.

    It would be nice to find a decent pic of one just to match up the fonts properly & get the colour close to correct.

    H.
     
    Howard Eisenhauer, Dec 3, 2015
    #9
  10. Old School 64

    Old School 64 Member

    Ok guys this is the first attempt from one of my sources...not a fan...especially the "J" and the "e" are not correct.
    As soon as I get a proof from my second source I will share with the group. jeep equipment 500.jpg
     
    Old School 64, Dec 3, 2015
    #10
  11. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    And the trademark ®
     
    Uncle Vin, Dec 4, 2015
    #11
  12. WYOMIKE

    WYOMIKE Oct 1971 pic

    Also the "M" in the equipment word seemed smaller to me. Also even through you can not tell in this picture, I am thinking on the logo in this picture was the same way. Can't explain why. If anybody has a copy of this manual maybe they can check and see if the M is smaller.

    [​IMG]
     
    WYOMIKE, Dec 4, 2015
    #12
  13. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    The "M" in the sticker (first photo of the thread) looks to be the same size as the rest of the lettering.
     
    Uncle Vin, Dec 4, 2015
    #13
  14. WadeS

    WadeS Member

     

    Attached Files:

    WadeS, Dec 7, 2015
    #14
  15. WadeS

    WadeS Member

    Morning. I'm replying on my phone.
    So hopefully it works. I made a bunch up with Orange or red background.about 4 inch square
    Also did a 24 inch square sign for the shop.
     

    Attached Files:

    WadeS, Dec 7, 2015
    #15
  16. WadeS

    WadeS Member

    The Jeep Special Equipment decals can be found at Collins Bros Jeep in Texas
     
    WadeS, Dec 7, 2015
    #16
  17. Uncle Vin

    Uncle Vin Member 2022 Sponsor

    Do you have the graphics file and/or do you have any you would like to sell?
     
    Uncle Vin, Dec 7, 2015
    #17
  18. WadeS

    WadeS Member

    I have a few left. Pm me please.
     
    WadeS, Dec 8, 2015
    #18
  19. Jeepbackhoe

    Jeepbackhoe New Member

    Wade,

    I have a 69 GoFoDigger backhoe and have been looking of this decal. Are you interested in sellingany more 24in signs?
     
    Jeepbackhoe, Dec 17, 2015
    #19
  20. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Folks, please keep transactions in pm's or in the classifieds per forum rules.

    H.
     
    Howard Eisenhauer, Dec 17, 2015
    #20
Page 1 of 2