1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless carb choice!

Discussion in 'Early CJ5 and CJ6 Tech' started by heffleysmill, Aug 16, 2014.

  1. heffleysmill

    heffleysmill 7 Slot Hotshot

    I am ready to put a new carb on the dauntless. To many issues with the worn out 2 Jet. I am looking for suggestions from those who have been through this already. I am not doing any climbing or heavy mudding. I am just looking for a general purpose carb.
    What say you jeep techies ?
     
  2. colojeepguy

    colojeepguy Colorado Springs

    Find another Rochester 2G.
    One that's in good shape should work well for your intended use.
    What's wrong with yours?
     
  3. djbutler

    djbutler Sponsor

    X2
    Follow the KISS principle, making minimum changes from the original design.

    Don
     
  4. Warloch

    Warloch Did you say Flattie??? Staff Member

    2G is a great carb if you only need the basics and what I would stick with unless your going 4bbl and that's another whole deal.
     
  5. 1960willyscj5

    1960willyscj5 Well-Known Member

    One of the Holley two barrels is a direct bolt-on replacement. Don't remember the model number. Same spread and bolt pattern as the 2G.
    I just happened to luck out and have one in my parts storage when the 2G on my Olds 425 quit on me one day. Didn't have the money for a rebuilt kit, so just said "might as well try this. It will either fit or it won't" , it fit.
     
  6. rocmoc

    rocmoc Member

    I replaced my with a Motorcraft 2100.

    rocmoc n AZ/Mexico
     
  7. shaun

    shaun Member

    was the Motorcraft 2100 a 4bbl?
     
  8. colojeepguy

    colojeepguy Colorado Springs

    2100 is a 2bbl
     
  9. 69Willys

    69Willys Las Vegas, NV

    Another vote for the 2G
     
  10. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

  11. mortten

    mortten I can’t put my finger on it 2024 Sponsor 2023 Sponsor 2022 Sponsor

  12. Deaner70

    Deaner70 Member

    I used for a while a 500 2v with an adapetor that went from the 2GC to the Holley pattern. Actually worked great with no issues.