It's been an expensive Month

Well February was a expensive month I got my holbrook long leaf kit, a ez 12 circuit wiring harness, turn signal kit, New lights all around, a sm465, a complete buick 225, bestop tigertop. I'm still waiting on the brown Santa clause to bring the top and harness but here's everything else

Sent from my VS980 4G using Tapatalk

 

Oh I forgot New rims and 33x10.5 bfg km2s


Sent from my VS980 4G using Tapatalk

 

Sent from my VS980 4G using Tapatalk

 

Sent from my VS980 4G using Tapatalk

 

Well the 225 is a bust pulled the intake and found this
Unless I can find another block I'll have a bunch of 225 parts up for a good home

Sent from my VS980 4G using Tapatalk

 

I'm not a very emotional person but this upset me lol I've been looking for a 225 for so long but anyways I'm starting the work tomorrow and trackung shows the rest of my stuff will be here on Monday

Sent from my VS980 4G using Tapatalk

 

well, if February was expensive, it looks like March will be very busy! have fun with your build.

 

Those leaf springs look good. I have head nothing but good about them.

 

Quick question who knows which direction the shims go on under the axle

Sent from my VS980 4G using Tapatalk

 

Ok I got that one the fat end goes in the front but now here's another dumb question the springs are 2 diffrent lengths the long set goes in the rear correct
Please help

Sent from my VS980 4G using Tapatalk

 

I'm gonna go with it considering the factory rears are longer than the front so if I'm wrong someone correct me before I get to far lol

Sent from my VS980 4G using Tapatalk

 

yes the long ones go in the rear. been looking at a set for a long time. just can't spend the cash right now.

 

Thank you
Ok one more question I'm working on the front springs right now I've got the correct measurements for where the mounts go and I think my shackles are angled properly for not having any weight on them but the pin on the springs Do not line up with the axle
What do I do
I've never attempted anything like this

Sent from my VS980 4G using Tapatalk

 

Sent from my VS980 4G using Tapatalk

 

Well the fronts are done,man i feel like this is taking me forever to do but oh well I'll start the rears tomorrow. Thankfully I'm off work tomorrow and got all day to finish it up

Sent from my VS980 4G using Tapatalk

 

Can't wait to see it all buttoned up man. Everything listed above will make a huge cosmetic difference alone!

 

Ya I'm looking forward to it also
I'm at a standstill at the moment the po welded up the rear shackle hangers and shackles completely solid those are going to be replaced ordered two new shackle hangers. Hoping they will get here tomorrow

But on the positive side my top comes in today

Sent from my VS980 4G using Tapatalk

 

Got my top and doors today
But I got to thinking about my custom extended windsheild I wonder if it will still work I guess we will find out

Sent from my VS980 4G using Tapatalk

 

been a little busy with work but the top fits but it is definitely stretched on there and the doors are a little short because the height of the windshield. Also I'm still not finished with springs I got all but 1



Sent from my VS980 4G using Tapatalk

 

Following with interest.