1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hole ID

Discussion in 'Early CJ5 and CJ6 Tech' started by Turk P, Jan 12, 2014.

  1. Turk P

    Turk P Member

    Can someone tell me what the holes on my 68' windshield are for? I don't want to weld them up if they are stock and serve a purpose. There are two holes about 3/8" in diameter on each side towards the top that go all the way through the frame. Then there are about a half dozen 1/8" holes that are only on the inside of the frame. All of the holes are in the black (original paint area) in the pic below. Both drivers and passengers sides have matching holes. My ECJ did have a Kelly Hardtop so could these be for some kind of door seal? Thanks for the help.
    [​IMG][/url] 20140112_151229 by Sparky Powers, on Flickr[/IMG]
     
    Turk P, Jan 12, 2014
    #1
  2. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    Looks like where the channel mounted for the soft door to slide into.
     
    wheelie, Jan 12, 2014
    #2
  3. 68BuickV6

    68BuickV6 Well-Known Member

    x2.
     
    68BuickV6, Jan 12, 2014
    #3
  4. 1967 CJ5A

    1967 CJ5A Mike 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Small ones I think are the channel, large ones are for the top half of the soft door hinge.
     
    1967 CJ5A, Jan 12, 2014
    #4
  5. tomatolane

    tomatolane Lane

    The bolts for my windshield extender for the half cab, are the 2 big holes on mine.

    see the 2 long pieces in the photo with the 2 holes?

    [​IMG]
     
    tomatolane, Jan 12, 2014
    #5
  6. Turk P

    Turk P Member

    Great. Thanks guys.
     
    Turk P, Jan 13, 2014
    #6